16-04-2021

Drivers Usb Compliance Cameras



General Test Tools

USB Power Delivery /USB Type-C Test Tools

It's the world's first UVC compliant USB3 Camera that is plug & play on Windows/Linux. USB 3.0 camera board does not require additional device drivers. These USB3 cameras work with standard Windows (DirectShow) and Linux (V4L2) software. USB20CV is the compliance test tool which evaluates High, Full and Low-speed USB devices for conformance to the USB Device Framework (Chapter 9), Hub device class (Chapter 11), HID class, and OTG specifications. Also included are mass storage class and USB video class specification tests. Drivers can disable the driver-facing camera when the vehicle is stopped. Amazon argues that the cameras can sometimes be helpful to drivers. For example, if another vehicle crashes into the.

USB4TM Test Tools

xHCI-based Test Tools

EHCI-based Test Tools

Electrical Test Tools and Fixtures

Products Used for Testing

Please review the USB-IF Compliance Updates webpage frequently for the latest information regarding the USB-IF Compliance Program. The updates may contain information on test requirements and/or test procedures. Subscribe to the USB-IF Compliance Update Mailing List by emailing admin@usb.org.

General Test Tools

USB Vendor Info File Generator

USB Vendor Info File Generator Version 3.1.0.2 (Updated October 9, 2020 ) can be downloaded here.

USB Power Delivery/USB Type-C Test Tools

QuadDraw and QuadraView

QuadDraw is the official software for the QuadraMAX hardware, and QuadraView is the official software for viewing the results generated by a QuadraMAX.

  • The Non-PPS Test Manual : QuadraMAX Manual
  • The PPS Test Manual: QuadraMAX PPS Test Manual

NOTE: The QuadDraw tool is supported on Windows 7 and above only.
NOTE: QuadDraw requires .NET 4.5

USB4TM Test Tools

USB4CV Tool

This tool is used to test the Logical Layer, Protocol Layer, and Tunneling functionality of a USB4 Router. This tool takes control over the USB4 Connection Manager and renders all products connected to it unusable. USB4CV should not be installed on an oscilloscope or any system that uses USB as its only form of input from the user.


The USB4CV tool Ver. 0.9.2.0 (Updated January 15, 2021) is available below.

NOTE 1: In order to use USB4CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The USB4CV tool is supported on Windows 10 and above.

If you have questions please email techadmin@usb.org.

For vendors seeking version numbers to be used at upcoming workshops please visit the compliance updates page found here.

USB4 Electrical Test Tool (ETT)

This tool kit contains the Window-based ETT utility used to initiate test modes on a USB4 Router.


The USB4 ETT tool Ver. 0.9.7 is available below in a zip file. This includes both GUI and CLI version. See included documentation for instructions on how to run the tool.

If you have any questions, please contact techadmin@usb.org.

Wilder Controller

Drivers usb compliance cameras best buy

Visit www.wilder-tech.com for information about Wilder products.

USB4 Test Fixtures and Microcontroller

Contact Sales@wilder-tech.com for sales information.

Contact Support-USB@wilder-tech.com with any Wilder hardware or software support questions.

xHCI-based Test Tools

USB3CV Tool

USB3CV is used to test USB 2.0 devices and USB 3.2 devices. This tool is used to test a USB product's control messaging, descriptors and basic protocol when connected to an xHCI controller. This tool takes control over the USB host controller and renders all products connected to it unusable. USB3CV should not be installed on an oscilloscope or any system that uses USB as its only form of input from the user.

The USB3CV tool Ver. 2.1.16.1 (Updated January 25, 2021) is available below.

NOTE 1: In order to use USB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The USB3CV tool is supported on Windows 7 and above.

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.
Cameras

View .pdf version of Company List here: https://www.usb.org/developers

If you have any questions, please contact usbcompliance@usb.org.


For vendors seeking version numbers to be used at upcoming workshops please visit the compliance updates page found here.

XHCICV Tool

This tool is used to test an xHCI controller for compliance to the xHCI Specification. This tool takes control over the USB host controller and renders all products connected to it unusable. Testing requires use of compliance devices, a device that supports LPM-L1, and samples of all speeds of devices supported by the xHCI controller being tested.

The XHCICV tool Ver. 2.2.5.0 (Updated January 13, 2021) is available below.

NOTE 1: In order to use XHCICV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The XHCICV tool is supported on Windows 7 and above.

If you have questions please email techadmin@usb.org.

HUB3CV Tool

This tool is used to test a USB Hubs control messaging, descriptors and basic protocol when connected to an xHCI controller. For the definition of a USB hub please refer to the USB base specifications. This tool takes control over the USB host controller and renders all products connected to the host controller unusable. USB3CV should not be installed an oscilloscope or any system that uses USB as its only form of input from the user.

The HUB3CV tool Ver. 1.3.15.1 (January 25, 2021) is available below.

NOTE 1: In order to use HUB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2 : The HUB3CV tool is supported on Windows 7 and above only.

Drivers Usb Compliance Cameras Software

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.

View .pdf version of Valid USB Vendor ID Numbers here: http://www.usb.org/developers

If you have any questions, please contact usbcompliance@usb.org.

DualHostUSB3CV Tool

Some system architectures use 2 xHCI hosts for a single connector. One host provides the 3.2 port, the other host provides the 2.0 port. DualHostUSB3CV is designed to test this architecture and contains a subset of tests from USB3CV and Hub3CV that need to be aware of both 2.0 and 3.2 speeds.


The DualHostUSB3CV tool Ver. 0.7.3.1 (January 25, 2020) is available below.

NOTE 1: In order to use DualHostUSB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2 : The DualHostUSB3CV tool is supported on Windows 7 and above only.

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.

View .pdf version of Valid USB Vendor ID Numbers here: http://www.usb.org/developers

If you have any questions, please contact usbcompliance@usb.org.

USB xHSETT

This tool kit contains the Window-based HSETT utility used to initiate test modes through an xHCI controller. xHSETT also enables electrical testing for Enhanced SuperSpeed products. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here.

The USBxHSETT tool Ver. 1.3.6.8 is available below

HSETT Documentation version 0.41 for EHCI and xHCI

NOTE 1: In order to use USBHSET, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted.
NOTE 2: The USBHSET tool works on Windows 7 and above only. Email admin@usb.org if you would like an old version of the tool that supports XP.

If you have any questions, please contact usbcompliance@usb.org.

EHCI-based Test Tools

USB20CV

Drivers Usb Compliance Cameras Walmart

USB20CV is the compliance test tool which evaluates High, Full and Low-speed USB devices for conformance to the USB Device Framework (Chapter 9), Hub device class (Chapter 11), HID class, and OTG specifications. Also included are mass storage class and USB video class specification tests. All USB peripherals and hubs are required to pass the Device Framework tests in order to gain certification. The other tests are mandatory for certification when supported. This tool takes control over the USB host controller and renders all products connected to it unusable. USB2CV should not be installed an oscilloscope or any system that uses USB as its only form of input from the user.

The USB20CV tool Ver. 1.5.13.1 is available below

NOTES

  • If you have installed a previous version of the USB 2.0 Command Verifier, you must uninstall it before installing the new version
  • The USB20CV tool is supported on Windows 7 and above only.
  • Please download the Company List and save as usb.if in the same directory as USB20CV.
  • Please do not install this tool on a machine that already has previous versions of USB20CV installed. This tool requires an Enhanced Host Controller Interface, EHCI. If testing Full or Low-speed devices, an intervening Hi-Speed USB Hub is required. USB20CV uses a special purpose driver for the Hi-Speed USB Host Controller. USB20CV automatically replaces the standard Microsoft EHCI host driver with its own test stack driver. When USB20CV exits, the original standard Microsoft EHCI host driver is restored. Stack switching has been extensively tested with Microsoft EHCI drivers only. Stack switching has not been tested with USB 2.0 host controller drivers provided by other vendors. Please read the Release Notes for details

Follow these instructions to download a JSON version of the USB-IF Company List:

  1. Click on this link: https://cms.usb.org/usb/api/usbif.json. Please wait until it loads completely.
  2. Copy the full contents of the JSON USB-IF Company List.
  3. Paste the full contents into a text file named usbif.json.
Cameras

View .pdf version of Company List here: https://www.usb.org/developers

USBHSETT

This tool kit contains the Window-based HSETT utility used to initiate test modes on an EHCI host controller. Detailed test procedures for high-speed host, hub and device electrical testing, tailored to common test equipment, can be downloaded here. A USB Electrical Analysis Tool is available separately for download (see USBET below). The procedures for legacy testing can be found in the USB-IF Compliance Program area. This software provided courtesy of Intel Corporation.

The USBHSET tool Ver. 1.3.5.7 is available below.

HSET Documentation version 0.41 for EHCI and xHCI


NOTE: The USBHSET tool works on Windows 7 and above only. Email admin@usb.org if you would like an old version of the tool that supports XP.

Electrical Test Tools and Fixtures

SigTest Tool

SigTest is the official tool for SuperSpeed USB transmitter voltage, LFPS, and Signal Quality electrical compliance testing as well as for calibrating SuperSpeed receiver test solutions. SigTest is designed to be used with the SuperSpeed electrical test fixture available in the USB-IF eStore.

  • SigTest version 4.0.23.2 (January 3, 2018) is available at https://www.intel.com/content/www/us/en/design/technology/high-speed-io/tools.html and should be used for USB 3.1 Gen 2 products.
  • The SigTest tool Ver. 3.2.11.3 (April 6, 2017) is available at https://www.intel.com/content/www/us/en/design/technology/high-speed-io/tools.html and should be used for USB 3.1 Gen 1 and older. SigTest 3.2.11.3 has been updated to remove the pass/fail criteria for Rj on the 5G transmitter electrical test.

USB Electrical Analysis Tool 20

USBET20 is a stand-alone electrical signal analysis tool for USB Compliance testing. USBET20 is the official compliance electrical analysis tool that performs pass/fail assessments on signal quality and inrush current data captured from an oscilloscope.

The USBET20 tool Ver. 2.10.00 (8MB, December 2020) is available below.
• USBET20 32-bit Windows

USBET20 accepts .tsv and .csv data files generated by USB-IF approved digital oscilloscopes and produces the familiar .html results files of the analysis.

NOTE 1: The only official analysis tool for certifying signal quality and inrush current is USBET20 published by the USB-IF. Some of the approved oscilloscope test solutions use proprietary software to assess signal quality and inrush current events. Please be sure to run captured signal quality and inrush current test data through USBET20 for an official assessment of the measurement.
NOTE 2: The USBHSET tool works on Windows 7 and above only.

USB HS Host SQ Test Fixture

Drivers

Fixtures can be purchased directly from Allion at https://www.allion.com/fixture-usb-type-a-b/.

Fixtures can be purchased directly from Eurofins at http://testusb.com/shop.htm

USB2.0 Type-C™ Electrical Test Fixtures

USB USB 2.0 Type-C™ Electrical Test Fixtures
Fixtures for testing the USB2.0 electrical compliance parameters for USB Type-C™ devices, hosts and hubs are available and exists of two fixtures:

1. USB2.0 Type-C™ plug test fixture (FS-HUCP)
2. USB2.0 Type-C™ receptacle test fixture (FS-HUCR)

Technical and purchase details can be found at http://testusb.com/TypeC20.html

Please review the USB-IF Compliance Updates webpage frequently for the latest information regarding the USB-IF Compliance Program. The updates may contain information on test requirements and/or test procedures.

Subscribe to the USB-IF Compliance Update Mailing List by emailing admin@usb.org.

Register Your Product for Testing

Information about the Compliance Program can be found on the Compliance Homepage. To register your product for testing please login and register here.

Test Matrix

Drivers usb compliance cameras wireless

Testing will be completed per the following USB 2.0 Test Matrix.

USB 2.0 Testing Information

The USB 2.0 Compliance Program consists of 3 main areas of testing:

  • Functional
  • Electrical
  • Interoperability

Drivers Usb Compliance Cameras Best Buy

Functional

The Functional area is performed by the USB-IF tool USB20CV. This tool performs general tests pertaining to chapter 9 of the USB 2.0 specification and in addition will perform class tests for any product that implements USB defined classes. The USB20CV tool can be found here.

Electrical

Approved Oscilloscope Vendors

  • Keysight
  • Rohde & Schwarz
  • Tektronix
  • Teledyne LeCroy

Please contact these companies directly for more information on their approved oscilloscope.

The Electrical area of the compliance program concentrates on the physical layer and uses a variety of tools. For High-Speed signal quality testing the USB-IF only accepts test data using the approved signal quality test fixtures found here. In addition, the only analysis reports the USB-IF accepts for USB 2.0 signal quality is generated using the USB-IF tool USBET found here. For other electrical tests please review the Low/Full-speed electrical test specification, the USB 2.0 Electrical test specification, and contact your approved oscilloscope vendor for fixtures and methodologies.

The USB 2.0 Electrical Compliance Test Specification can be downloaded in our Documents Library.

Interoperability

The Interoperability area of the compliance program concentrates on interoperation between the product under test and known good USB products. The interoperability methodology for USB 2.0 uses the same methodology as USB 3.2 and can be found here.

Please visit the USB Compliance Tools page for downloads.